Archives
- August 2020 (1)
- October 2019 (2)
- September 2018 (1)
- June 2018 (1)
- April 2018 (3)
- January 2018 (2)
- December 2017 (3)
- August 2017 (2)
- July 2017 (1)
- February 2017 (1)
- January 2017 (5)
- September 2016 (2)
- January 2016 (1)
- November 2015 (1)
- September 2015 (2)
- October 2014 (1)
- April 2014 (1)
- March 2014 (2)
- December 2013 (1)
- November 2013 (1)
- October 2013 (3)
- September 2013 (2)
- July 2013 (3)
- May 2013 (2)
- March 2013 (2)
- February 2013 (2)
- January 2013 (1)
- December 2012 (5)
- November 2012 (5)
- October 2012 (4)
- September 2012 (3)
- August 2012 (7)
- July 2012 (8)
- June 2012 (2)
- May 2012 (2)
- April 2012 (4)
- March 2012 (1)
- January 2012 (1)
- December 2011 (1)
- November 2011 (1)
- October 2011 (2)
- September 2011 (1)
- August 2011 (3)
- July 2011 (4)
Tag Archives: networking
Cisco Configuration “Expect” Backup Script
I was recently tasked with backing up switch configurations automatically. No problem, right? Wrong. There was nothing to spend on this project so it was up to me and whatever I could do with a script. I had made a telnet script in the past but was not crazy about passwords flying around in plain text. I really have very little scripting experience so many of you will find this very easy to understand and follow since there is nothing complicated about my scripting skills.
Continue reading
Posted in Networking, Scripts, Shell Tagged backup, cisco, configuration, IOS, linux, networking 3 Comments
Parsing Cisco Show Command Output
If you have done even the basics in networking you have probably used a “show” command at some point on a Cisco networking device. Show commands give us insight into the configuration, performance and issues that face that device. One issue with show commands, however, is that they can be very verbose. Many commands give you way more information than you are looking for and are difficult to get through quickly. Luckily for you and I there are output modifiers to help us parse the output.
I will attempt to teach this short lesson with an example. Say you want to look at all interfaces and see what access lists are applied to them. You could do “show run” and read all of the output until you find what you are looking for.
Continue reading
Discovering a Cisco Network with CDP (Part 3)
This is part 3 of the series on network discovery using CDP. If you have not read the first or second parts you can find them HERE and HERE. So far we have looked at mapping the infrastructure with CDP as well as actually mapping hosts (by MAC address) to switch ports. I wanted to take the opportunity, in this write up, to step away from the Cisco command line and look at another product that leverages CDP: VMware. As you already know CDP is simply a packet emitted from physical ports of Cisco devices. Anything that cares to listen … Continue reading
Discovering a Cisco Network with CDP (Part 2)
Part one of this two part series talked about walking out your network with CDP. This is useful when all you need to know is the topology of the network equipment its self. The next step in the process is to map out where servers or other hosts are located. The first way of doing this would be to log onto the host, capture packets, and look for a CDP packet that indicates the switch name and port that the host is connected to. This would require packet capture software on each system and is really not practical. The second … Continue reading
Our RSS Feed