Archives
- August 2020 (1)
- October 2019 (2)
- September 2018 (1)
- June 2018 (1)
- April 2018 (3)
- January 2018 (2)
- December 2017 (3)
- August 2017 (2)
- July 2017 (1)
- February 2017 (1)
- January 2017 (5)
- September 2016 (2)
- January 2016 (1)
- November 2015 (1)
- September 2015 (2)
- October 2014 (1)
- April 2014 (1)
- March 2014 (2)
- December 2013 (1)
- November 2013 (1)
- October 2013 (3)
- September 2013 (2)
- July 2013 (3)
- May 2013 (2)
- March 2013 (2)
- February 2013 (2)
- January 2013 (1)
- December 2012 (5)
- November 2012 (5)
- October 2012 (4)
- September 2012 (3)
- August 2012 (7)
- July 2012 (8)
- June 2012 (2)
- May 2012 (2)
- April 2012 (4)
- March 2012 (1)
- January 2012 (1)
- December 2011 (1)
- November 2011 (1)
- October 2011 (2)
- September 2011 (1)
- August 2011 (3)
- July 2011 (4)
Tag Archives: configuration
Cisco ISR Router Any Connect with Front Door VRF and a Meraki Firewall
First, let me start by saying I love the Meraki networking stack. It is easy and efficient to deploy and customers love it. Occasionally, however, you find a key feature that Meraki won’t do. In this case, Any Connect client VPN. Continue reading
Posted in Networking, Security Tagged cisco, configuration, IOS, networking, security Leave a comment
Static DHCP Reservations in IOS From a File
Configuring a DHCP server to hand out IP addresses is probably one of the most fundamental skills a network engineer could have. Don’t be fooled, however, there is plenty of complexity to be had here as well should your environment require it. Occasionally it can be helpful to have a client device receive a static IP address. You can configure this manually or you can allow DHCP to do the work for you. In my example, we have two printers we would like to statically address to ensure they are always available to a print server without any reliance on … Continue reading
Cisco CUCM 8861 / 8865 Wireless Configuration
The standard mode of operation is typically to wire your IP phone into the network lighting things up with wired Ethernet and PoE. In the case of the 8861 and the 8865 you have the option to disconnect the PoE, power up with a 48 volt power brick and take to the Wi-Fi air waves. Continue reading
Posted in Collaboration, Telephony Tagged cisco, collaboration, configuration, CUCM, networking, wireless Leave a comment
Configure PLAR on SCCP and SIP Phones in CUCM
PLAR is a common feature often used for elevator or emergency phones in public areas. The idea is that when someone takes the phone off hook a call is immediately placed to someone who can help. It’s a critical configuration to get right and test before giving any stamp of approval. Continue reading
Our RSS Feed