Archives
- August 2020 (1)
- October 2019 (2)
- September 2018 (1)
- June 2018 (1)
- April 2018 (3)
- January 2018 (2)
- December 2017 (3)
- August 2017 (2)
- July 2017 (1)
- February 2017 (1)
- January 2017 (5)
- September 2016 (2)
- January 2016 (1)
- November 2015 (1)
- September 2015 (2)
- October 2014 (1)
- April 2014 (1)
- March 2014 (2)
- December 2013 (1)
- November 2013 (1)
- October 2013 (3)
- September 2013 (2)
- July 2013 (3)
- May 2013 (2)
- March 2013 (2)
- February 2013 (2)
- January 2013 (1)
- December 2012 (5)
- November 2012 (5)
- October 2012 (4)
- September 2012 (3)
- August 2012 (7)
- July 2012 (8)
- June 2012 (2)
- May 2012 (2)
- April 2012 (4)
- March 2012 (1)
- January 2012 (1)
- December 2011 (1)
- November 2011 (1)
- October 2011 (2)
- September 2011 (1)
- August 2011 (3)
- July 2011 (4)
Tag Archives: collaboration
Taking a Screenshot on an 8800 Series Cisco Phone
Taking screenshots of the screen of Cisco IP phones can be helpful in remote troubleshooting and documentation. Taking screenshots of the latest 88xx phones is just as simple as in the past. Continue reading
Posted in Collaboration, Telephony Tagged cisco, collaboration, CUCM, trouble shoot, voip 3 Comments
Calling Party Routing of Anonymous Calls SIP Header Fix Up
Cisco’s “Route Next Hop By Calling Party Number” translation pattern option has addressed the common question of “how do I route or block calls based on Caller ID?” since CUCM version 8. However, there still remains a limitation and that is how to deal with “Anonymous”, “Restricted” or “Unknown” Calling Numbers. The problem is that the SIP information actually lists this as part of the From header where CUCM typically would expect to see a numeric value. Continue reading
Cisco CUCM 8861 / 8865 Wireless Configuration
The standard mode of operation is typically to wire your IP phone into the network lighting things up with wired Ethernet and PoE. In the case of the 8861 and the 8865 you have the option to disconnect the PoE, power up with a 48 volt power brick and take to the Wi-Fi air waves. Continue reading
Posted in Collaboration, Telephony Tagged cisco, collaboration, configuration, CUCM, networking, wireless Leave a comment
Cisco Mobile and Remote Access QR Code
If you have checked out the Cisco Spark Calling offering you may be familiar with the QR Code that is generated that can be used to register 8845 and 8865 phones to Spark. You simply hold the QR code in front of the phone and it’s read in and the phone registers. The Spark Calling QR code is a 16 digit number unique to Spark with a limited validity period for security. As an engineer I had wondered to myself why this functionality cannot be available with CUCM deployments as well. After all the phones run the same software… As … Continue reading
Our RSS Feed